Page 3
CONNECTION DIAGRAM
The cabling of the Zonemaster single VAV system is straightforward.
The touchpad connects the damper motor and power supply in serial via
an adaptor, and the temperature sensor can be plugged into the socket on
the back of the touchpad, as shown in Figure 1.
Figure 1. Wiring Diagram
INSTALLATION
1)
Plug the 24VAC power supply
into the power-in port and
a pre-tested control cable
into the touchpad port in the
adaptor. Plug the adaptor into
the damper.
Warning
- Zonemaster components
are not compatible with
other motors.
