Polyaire Zonemaster Variable Air Volume, Техническое руководство и руководство пользователя

Страница: 15 / 32

Page 12
7. Naming Zones - Master Touchpad
The name of a zone is called ‘Zone_addr’. For example, zone 1, which
has an address of 1, is called ‘Zone_1’ on its factory default. The names
can be customised as follows:
1) At the setting mode, press button until
the LCD displays the ‘Spill’ or ‘Bypass’ screen.
2) Press button to select spill or bypass mode.
3) Press or button to change the
spill/bypass setpoint to its desired value.
The adjustable range is from 0% to 50%.
We recommend a setting of 30% or more to
safeguard Duct. If no spill or bypass control is
required in the system, the setpoint MUST be
set to 0%.
1) At the setting mode, press button until
the LCD displays the first zone name, for
example ‘Z1 Name’ on the top line of the LCD.
The second line shows the current name of
zone 1.
2) Press or button to select one of
the preset zone names for the zone. There are
26 preset names in the list.
3) To make changes to the preset selected name,
press button to move to the character
that is flashing.
4) Use or button to select the
character from the list as desired. There are 26
letters in capital and normal case, 10 numbers
and a space in the list.
5) Press button to select the next zone
naming screen and follow steps 2 to 4 to
customise the name of the zone.
8. Damper on/off Test
1) Switch on the air conditioner.
2) Press button to turn a zone on or off to check if the damper is
correctly connected by feeling the air at the outlet. Refer to User’s
manual for the operation.