Polyaire Zonemaster Variable Air Volume, Техническое руководство и руководство пользователя

Страница: 10 / 32

Page 7
1 2) Turn off the power and disconnect
the touchpad.
13) Position the touchpad at the right
place. Ideally, its position should
be approximately 1.6 metres off
the floor on the wall. Fit the data
cable and the control cable through
the wall cavity and connect to
the touchpad again. Mount the
touchpad onto the bracket in the
wall cavity.
Please note that the touchpad should not be
exposed to direct sunlight and other heat
sources.
13) Apply the power again to the transformer. The
LCD should show clock time and temperature
where the touchpad is located after showing
‘initiate’ on the second line for about 15
seconds.
BYPASS CONTROL
1) If bypass control is chosen for the
system, mount the green damper
controller on the top of a green
motorised damper and plug the
bridge cable in.