Poly Medialign 65, Руководство по установке

Страница: 68 / 154

Setting Up the Poly Medialign Dual Display System
68
b Screw the leveling feet out until the lower edges of the feet extend 34 mm (1 5/16”) beyond the
end of the v-rail.
c If using a riser kit, remove the leveling feet from the V-rails and install them in the risers. Screw
them in to the risers until the lower edges of the feet extend 34 mm (1 5/16”) beyond the end of
the riser. Slide the risers on the V-rails and attach them using two M6 × 12mm screws per riser.
d Place two horizontal frames between the V-rails. Orient them so that the faces with screw holes
are toward the floor and the vertical straps are up. One rail edge of each frame has small screw
holes and the other has large screw holes. Orient the top frame with the large screw holes up
(away from the wall). Orient the lower frame with the large screw holes down (toward the wall).
Attach the frames to the V-rails using four M10 × 25mm screws per frame.
34 mm
(1 5/16 in)
HORIZONTAL FRAME
2350-85976-001
FRAME V-RAIL
2350-85975-001
FRAME V-RAIL
2350-85975-001
(8) M10 X 25mm SCREW
1601-67617-002
HORIZONTAL FRAME
2350-85976-001
LARGE
SCREW HOLE
LARGE
SCREW HOLE