Poly Medialign 65, Руководство по установке

Страница: 35 / 154

Setting Up the Poly Medialign Single Display System
35
f Connect one end of a 2M HDMI cable to the display HDMI 1 input. Connect the other end to the
codec primary display output.
g Place the speaker power adapter in the lower rail of the lower horizontal frame toward the right
side.
h Connect a 1M C13-C14 cable to the speaker power adapter. Route it up behind the frame and
connect it to the PDU.
i Connect the speaker power Y-adapter to the speaker power adapter.
j Route the short side of the Y-adapter to the closest speaker and connect it.
k Route the long side of the Y-adapter to the farthest speaker and connect it.
l Place the codec power adapter in the lower rail of the lower horizontal frame at about the center.
Route the cable up to the codec and connect it.
m Connect a 1M C13-C14 cable to the codec power adapter. Route it up behind the frame and
connect it to the PDU.
n Connect the C14-C5 adapter to the display. Connect a 1M C13-C14 cable to the C14-C5 adapter.
Route it down and connect to the PDU.
o Connect the mains cable to the wall outlet. Route it behind the frame and connect it to the PDU.
p Connect the network cable to the network port. Route it behind the frame and connect it to the
codec network port.
q Connect the microphone cable to the codec. Route it down, out of the frame, and to the furniture
on which the microphone will be placed. Connect the other end of the cable to the microphone.
4 Ensure that all cables and electrical connections are complete. Turn power on for all of the devices
and verify functionality.