POLTI Vaporetto Lecoaspira FAV 80 TURBO INTELLIGENCE, Инструкция по эксплуатации

Страница: 42 / 128

This programme makes it possible to turn the
appliance into a powerful ironing system.
Open the door of the built-in socket and
insert the built-in plug of the iron accessory,
set Programme P9 for model , P4 for
model , as indicated in Section 3.
Adjust the quantity of steam by pressing the
UP and DOWN buttons, based on the type of
fabric to be ironed.
18. OUT OF WATER
Thanks to the self-filling system, it is not
necessary to wait for the appliance to cool
before refilling the boiler with water.
When the tank is out of water, the indicator
light on the control panel (tap or drop) will
turn on and you will hear a beep.
To continue with steam cleaning, simply open
the tank door and add water.
19. AUTOMATIC SUCTION LOCK
When the dirt sucked into the water filter
collector reaches the maximum level allowed,
suction will be automatically blocked by the
special safety float. This can also happen
when the water in the collector is very dirty.
In these cases, there is an increase in the
motor rpm: it is therefore necessary to
remove the water in the collector.
Turn off the appliance and only restart it
when the level of the water in the collector
has been restored as described inSection 1.
20. POLTI BIOECOLOGICO
Polti Bioecologico is an anti-foaming and
deodorising product containing natural
substances. It prevents foaming inside the
water filter thus ensuring correct functioning
of the appliance. When diluted inside the dirt
collection tank, Polti Bioecologico also acts
as an effective deodoriser and thanks to the
natural substances which it is composed of, it
prevents unpleasant smells inside the
collection tank and releases a fresh clean
fragrance into the environment.
Contents of the phial: 5 ml
Polti Bioecologico is sold at all major
domestic-appliance shops or online at
www.polti.com.
HOW TO USE POLTI BIOECOLOGICO
20.1 Add water to the water filter as
instructed in this manual.
20.2 Shake the phial before use.
20.3 Bend and break the phial cap.
20.4 Pour the contents of the phial into the
water filter collector of the appliance.
21. GENERAL MAINTENANCE
To clean the outside of the appliance, only
use a damp cloth and tap water.
All accessories can be cleaned using running
water, ensuring they are completely dry
before the next use (37).
Do not use detergents of any type.
22. CLEANING THE WATER FILTER
COLLECTOR
(ordinary maintenance)
22.1 Ensure that the appliance is switched off
and disconnected from the mains.
22.2 Lift the water filter collector removing it
from its housing using the special handle (2).
22.3 Turn the handle backward and remove
the water filter unit (3-4).
22.4 Empty the tank by tilting it towards the
spout (35).
22.5 Turn the elbow tube downward until it
slides off the filter unit (36).
22.6 Separate all the components and rinse
them under running water (37).
In order to optimise ironing times, we re-
commend starting to iron the more delicate
fabrics first (steam quantity 0 or 1) and then
moving on to fabrics that require greater
steam pressure. Otherwise, although the
supply of steam is not prevented, it will be
necessary to wait for the boiler to cool down
to allow the appliance to reach the steam
pressure selected.
In this programme, if the iron accessory is
not inserted steam is not dispensed.
To vacuum surfaces it is not necessary to fill
the tank, simply turn the boiler off.
WARNING: Immediately turning the applian-
ce back on, without replacing the water,
could damage the air outlet filter.
Use 1 phial per use.
A possible change in the colour of the liquid
does not alter the functioning or the efficacy
of the product.
WARNING: Never pour Polti Bioecologico
into the boiler.
FAV80
FAV70
No sections lit:
SYNTHETIC FABRICS and SILK
3 sections lit: LINEN
2 sections lit: COTTON
1 sections lit: WOOL
IT
A
L
IA
N
O
E
N
G
L
IS
H
| 42 |
LECOASPIRA FAV70_80 - W1ES - M0S12126 - 1V01_FEV 1000-950.qxd 25/01/2021 15:52 Pagina 42