POLTI Vaporetto Lecoaspira FAV 80 TURBO INTELLIGENCE, Инструкция по эксплуатации

Страница: 40 / 128

9.5 For model select
Programme P5, as indicated in
Section 2.
Wait for the indicators to
remain lit.
This programme is ideal for
eliminating mites, and vacuuming hair, animal
fur and dust.
Steam the surface to be treated. Releasing
the steam button or after a maximum of 60
seconds, suction starts automatically, making
it possible to dry the treated surface.
If you need to restart the programme to
complete cleaning of the surface, just press
the steam button again.
In any case, it is possible to stop the
programme manually by pressing the suction
button.
10. UPHOLSTERY, WALL
COVERINGS, CAR INTERIORS
Make sure that you have prepared the
appliance following the instructions provided
in Section 1.
10.1 For suction only, connect the nozzle for
frames (G) to the handle (A) and follow the
instruction indicated in point 3.1.
10.2 For steam cleaning and suction use the
nozzle for frames (G) with the cap cloth
(I)(25) attached and connect it to the handle
(A) or to the extension tubes (C)(22-23).
10.3 Follow the instructions provided in
points 4.1 and 4.2.
Ensure that the steam lock on the handle is
deactivated (33).
10.4 It is possible to use the suction and
steam features either together or by
alternating them, activating both as
described in the previous points.
Combined use of steam and suction allows
the most efficient sanitising of the surface,
dissolving dirt and removing grease, germs
and mites; it allows brightens the colour of
fibres and dries surfaces more quickly.
10.5 For model select
Programme P6, as indicated in
Section 3.
Wait for the indicators to
remain lit. This programme is
ideal for eliminating mites, and
vacuuming hair, animal fur and dust.
Intermittent jets of steam are supplied and at
the same time suction begins.
When the steam button is released the flow
of steam stops, while suction will continue for
a few seconds more to dry the surface
treated. Suction stops automatically after a
period of time in proportion to the time the
steam was supplied.
If you need to restart the programme to
complete cleaning of the surface, just press
the steam button again.
In any case, it is possible to stop the
programme manually by pressing the suction
button.
11. CLEANING BATHROOM
FIXTURES, GROUTING AND
KITCHEN WORKTOPS
Make sure that you have prepared the
appliance following the instructions provided
in Section 1.
11.1 Connect the concentrator accessory (D)
equipped with bristly round brush (5) to the
handle (A)(26). The steam lance (F) can be
attached to the concentrator accessory (D).
This is recommended for reaching the most
difficult areas, ideal for cleaning radiators,
door and window frames, bathrooms and
shutters.
To connect the steam lance (F) to the
concentrator accessory (D) just screw it on
like the coloured brushes (26), which can be
screwed onto the lance and/or onto the
accessory directly.
11.2 Turn on the boiler and adjust the strength
of the steam following the instructions
provided in point 4.2.
11.3 Ensure that the steam lock is deactivated
(33) and press and hold the steam trigger on
the handle to begin cleaning.
11.4 Connect the suction lance (M) to the
concentrator accessory (D) and activate the
WARNING: Before cleaning leather or fa-
brics with steam, consult the manufacturer’s
instructions and always carry out a test on a
hidden part or on a sample of the material.
Allow the steamed part to dry to make sure
that no changes in colour or deformations
have occurred.
For safety reasons, engage the steam lock
on the handle during vacuuming.
FAV80 FAV80
The suction speed and the quantity of steam
are preset and therefore they cannot be
adjusted manually.
Before steaming surfaces, we recommend
vacuuming up any hair or dust, using the va-
cuum only function in manual mode.
IT
A
L
IA
N
O
E
N
G
L
IS
H
| 40 |
LECOASPIRA FAV70_80 - W1ES - M0S12126 - 1V01_FEV 1000-950.qxd 25/01/2021 15:52 Pagina 40