POLTI Vaporetto Lecoaspira FAV 80 TURBO INTELLIGENCE, Инструкция по эксплуатации

Страница: 37 / 128

E
N
G
L
IS
H
| 37 |
FAV70
FAV80
4. MANUAL OPERATION
In this mode, it is possible to manually adjust
the quantity of steam dispensed and the
suction speed.
Make sure that you have prepared the
appliance following the instructions provided
in Section 1.
4.1 For suction only, press the suction button
on the appliance (29) and proceed with
cleaning.
The suction power can be adjusted, based on
the surface to be cleaned, by holding the
suction button down. In this case the number
of segments on the suction indicators will
increase or decrease on the appliance control
panel (30).
Hold the suction button down to stop
suction.
4.2 For steam cleaning only, switch on the
boiler using the button (31). The pressure
and boiler indicators will start flashing. Select
the steam pressure desired by pressing the
button again. One of the 4 pressure
indicators lights up every time the button is
pressed, indicating the increase in the
pressure of the steam. Press the button to
reduce the steam pressure. One of the
pressure indicators goes off every time the
button is pressed, showing the reduction in
the steam pressure.
When the pressure indicator and the boiler
indicator remain lit, it means that the
appliance has reached the desired steam
pressure (32).
Ensure that the steam lock on the handle is
deactivated (33). Hold the steam trigger to
dispense steam (34), the relative indicator
will turn on.
To stop the steam flow, simply release the
steam button.
4.3 For steam cleaning and suction, carry out
points 4.1 and 4.2 at the same time.
USE OF FRAMES FOR FLOORS
5. CLEANING HARD FLOORS
(tiles, ceramic surfaces, etc.)
Make sure that you have prepared the
appliance following the instructions provided
in Section 1.
5.1 Connect the two extension tubes (C) to
the handle (A).
5.2 For suction only, connect the universal
brush (B) with the frame w/bristles (B1) and
follow the instruction indicated in point 4.1.
5.3 For steam cleaning and suction attach the
frame for liquids (B2) to the universal brush
(B).
5.4 Select programme P1 for
model , P0 for the
model , as indicated in
Section 3. This programme is
specifically for cleaning
parquet and delicate floors.
The function involves the combined action of
an intermittent flow of steam with adequate
For safety reasons, engage the steam lock
on the handle during vacuuming.
Level 1 Curtains
Level 2 Sofas and cushions
Level 3 Rugs and carpets
Level 4 Floor or liquid collection
When the appliance is switched on again,
the suction level will be that set last time it
was used.
Steam
Maxi-
mum
4 indicators
turned on
To remove scaling, stains,
and grease and sanitise
Regular
steam
2 or 3 indi-
cators tur-
ned on
For carpets, rugs, windows,
floors
Mini-
mum
steam
1 indicator
turned on
To steam plants, clean deli-
cate fabrics, wall coverings,
sofas, etc.
HARD FLOORS
DELICATE
FLOORS
RUGS/
CARPETS
BRISTLE FRAME
(B1) suction only
BRISTLE FRAME
(B1) suction only
BRISTLE FRAME
(B1) suction only
RUBBER FRAME
(B2) for steam
and suction. The
universal cloth
can be used com-
bined with the
RUGS/CARPET
FRAME (B3).
RUGS/CARPET
FRAME (B3) with
parquet cloth for
steam and suc-
tion
RUGS/CARPET
FRAME (B3) for
steam and suc-
tion
For safety reasons, engage the steam lock
on the handle during vacuuming.
FAV80
FAV70
LECOASPIRA FAV70_80 - W1ES - M0S12126 - 1V01_FEV 1000-950.qxd 25/01/2021 15:52 Pagina 37