POLTI Vaporetto Lecoaspira FAV 80 TURBO INTELLIGENCE, Инструкция по эксплуатации

Страница: 38 / 128

suction force.
5.5 Wait for the indicators to remain lit.
5.6 Disconnect the steam lock on the handle
(33) and hold the steam button down (34) to
start dispensing steam.
Steam starts to be dispensed continuously
and suction starts at the same time. Release
the steam button to stop the steam flow,
while suction will continue to dry the surface
treated.
If you need to restart the programme to
complete cleaning of the surface, just press
the steam button again.
The combined use of steam and suction
allows the most efficient sanitising of the
surface, dissolving dirt, eliminating grease,
germs and mites, and above all allows drying
of the surfaces.
In this position, it is also possible to vacuum
small quantities of liquids and dry the floor.
Once the cleaning cycle is finished, it is
possible to start suction by pressing the
suction button to remove any residual
humidity.
5.7 For steam cleaning only, proceed as
indicated in point 4.2. It is possible to use the
abrasive action of the universal cloth supplied
(L). Attach it to the universal brush (B)
before starting to clean the surface (21).
6. CLEANING DELICATE FLOORS
(wooden, stone, waxed surfaces,
etc.)
Make sure that you have prepared the
appliance following the instructions provided
in Section 1.
6.1 Connect the two extension tubes (C) to
the handle (A).
6.2 For suction only, connect the universal
brush (B) with the frame w/bristles (B1) and
follow the instruction indicated in point 4.1.
6.3 For steam cleaning and suction attach the
rug/carpet frame (B3) to the universal brush
(B). Attach the parquet cloth supplied (L)(21)
to the universal brush (B).
6.4 Select programme P2 for
model
, P1 for
the
model , as indicated in
Section 3. This programme is
specifically for cleaning
parquet and delicate floors.
The function involves the combined action of
a delicate intermittent flow of steam with
adequate suction force.
6.5 Wait for the indicators to remain lit.
6.6 Disconnect the steam lock on the handle
and hold the steam button down to start
dispensing steam.
Intermittent steam starts to be dispensed and
suction starts at the same time. Release the
steam button to stop the steam flow, while
suction will continue for a few seconds more
to dry the surface treated.
If you need to restart the programme to
complete cleaning of the surface, just press
the steam button again.
7. CLEANING RUGS AND CARPETS
Make sure that you have prepared the
appliance following the instructions provided
in Section 1.
7.1 Connect the two extension tubes (C) to
the handle (A).
7.2 Connect the universal brush (B) to the
rug/carpet frame (B3).
7.3 For suction only follow the instructions in
point 4.1.
The suction speed and the quantity of steam
are preset and therefore they cannot be
adjusted manually.
Before removing the cloth from the brush,
wait a few minutes to allow the cloth to cool.
WARNING: For additional safety, test steam
delivery on a hidden part, leave the steamed
part to dry to ensure that no changes in co-
lour or deformation have occurred.
Before using the appliance on delicate
surfaces, ensure that the part in contact with
the surface is free from foreign bodies that
could cause scratches.
For safety reasons, engage the steam lock
on the handle during vacuuming.
FAV80
FAV70
The suction speed and the quantity of steam
are preset and therefore they cannot be
adjusted manually.
Before removing the cloth from the brush,
wait a few minutes to allow the cloth to cool.
WARNING: Before cleaning fabrics with
steam, consult the manufacturer’s
instructions and always carry out a test on a
hidden part or on a sample of the material.
Allow the steamed part to dry to make sure
that no changes in colour or deformations
have occurred.
For safety reasons, engage the steam lock
on the handle during vacuuming.
IT
A
L
IA
N
O
E
N
G
L
IS
H
| 38 |
LECOASPIRA FAV70_80 - W1ES - M0S12126 - 1V01_FEV 1000-950.qxd 25/01/2021 15:52 Pagina 38