lifespan, the product must be disposed of
separately from ordinary household wastes.
The user is responsible for delivering the ap-
pliance to an appropriate collection facility at
the end of its useful lifespan.
Appropriate separate collection to permit re-
cycling, treatment and environmentally com-
patible disposal helps to prevent negative
impact on the environment and human he-
alth and promotes the recycling of the mate-
rials making up the product. For more infor-
mation on available collection facilities,
contact your local waste collection service or
the shop where you bought this appliance.
P
P
P
P
R
R
R
R
E
E
E
E
P
P
P
P
A
A
A
A
R
R
R
R
A
A
A
A
T
T
T
T
II
II
O
O
O
O
N
N
N
N
F
F
F
F
O
O
O
O
R
R
R
R
U
U
U
U
S
S
S
S
E
E
E
E
• Unscrew the patented safety cap (
7
)
(Fig.1) and fill the generator with 1,3 litres
of water, using the special anti-drip filler
bottle (
U
).
• Water by its nature contains magnesium,
mineral salts and other deposits which in
hard water areas can contribute to
limescale build up in the tank. To avoid
these problems, it is necessary to swill out
with tapwater and empty the generator
tank after every 3 or 4 uses.In very hard
water areas we recommend the use of our
KALSTOP FP 2003, a special natural-
base decalcifier which inhibits and breaks
down limescale. This is a preventive
against limescale build-up and protects
the metal walls of the steam generator
tank. KALSTOP is available from Polti
dealers or by mail-order from your Polti
Service Centre.
• Carefully screw on the sealing cap (
7
) to
hand tight.
• Lift the water container handle (
22
) un-
hooking it from its position (Fig. 2) and re-
move the container (
20
) (Fig. 3).
• Turn the container handle (
22
) as shown
in figure 4, so as to remove the “Eco Ac-
tiveFilter” water filter assembly (
23
).
• Fill the water container (
20
) with about 1,2
litres of simple tap water until the MAX
level indicator (
21
) is reached, as in fig. 5.
• Put the filter assembly (
23
) back into place
in the water container (
20
) returning it to
its initial position.
• Replace the water container back into po-
sition.
• Support the handle (
22
) until it hooks into
its place on the water container (
20
).
O
O
O
O
P
P
P
P
E
E
E
E
R
R
R
R
A
A
A
A
T
T
T
T
II
II
O
O
O
O
N
N
N
N
• Open the flap of the built-in socket (
9
); fit
the monobloc plug (
B2
) by pushing it,
without pressing the button, until you hear
the click of the locking mechanism, then
make sure it is well locked (fig.6).
• To disconnect the monobloc plug (
B2
)
from the appliance, push the button (
B3
)
and pull the monobloc so as to separate it
from the appliance (fig.6a).
• Connect the plug to the mains.
Operation with steam + suction
• Press the main switch (
1
), the first level of
suction indicators (
5
) will start to flash.
• Press the boiler switch (
2
) which will light
up.
• Wait for the pressure indicator lamp (
4
) to
light up. When it does the Vaporetto
Lecoaspira will be ready to generate
steam.
• Press the suction button (
A4
) on the han-
dle (
A2
). The suction function will start up
at the minimum speed and the first stage
of the indicator lamp set (
5
) will stop flash-
ing and remain on. For correct use of the
suction function read the section “Suction
control/ switching off”.
Note:
The handle (
A2
) has a safety button
(
A3
) which when set in locked position
prevents activation of the delivery of
steam. If the appliance is left temporarily
unattended while it is in an activated con-
dition, please remember to place the
safety button (
A3
) in the locked position.
To resume delivery, return the button to its
initial position.
LECOASPIRA 700 - 701
Содержание VAPORETTO LECOASPIRA 700
Страница 1: ...701 700...
