POLTI Vaporetto Handy 15, Инструкция по эксплуатации

Страница: 27 / 90

operating indicator light and the “steam
ready” indicator light will come on.
1.7 Wait for the “steam ready” indicator light
to go out (approx. 5 minutes). Vaporetto is
now ready for use.
2. CONNECTION OF ACCESSORIES
2.1 To attach the handle to the extension
hoses, floor brush or the accessory adapter,
simply insert one until you hear the button
click indicating that the accessory is locked in
place (8). To release the accessory, just hold
the button down and separate the
components (8).
Before using the accessories, make sure that
they are firmly in place.
2.2 To connect the steam lance and the small
brush to the handle or the extension hoses,
they must first be connected to the
accessory adapter. Then, lock them in place,
turning in the direction of the arrow printed
on them (10).
2.3 To connect the steam concentrator and
the small brushes to the handle or the
extension hoses, they must first be
connected to the steam lance. Just line up
these accessories with the point of the lance
applying slight pressure (11).
3. CLEANING FLOORS
3.1 Make sure that Section 1 has been
followed and connect the accessories as
indicated in Section 2.
3.2 Connect the extension tubes to the steam
hose and the floor brush to the extension
tubes.
3.3 Attach the supplied cloth to the floor
brush, locking it in place with the special
lever hooks (9).
3.4 Deactivate the steam lock (5) and
continue with steam delivery, pressing the
steam trigger on the handle of the steam
hose.
3.5 Clean the floors by moving the brush.
4. CLEANING RUGS
4.1 Make sure that Section 1 has been followed
and connect the accessories as indicated in
Section 2.
4.2 Connect the extension tubes to the steam
hose and the floor brush to the extension
tubes.
4.3 Deactivate the steam lock (5) and
continue with steam delivery, pressing the
steam trigger on the handle of the steam
hose.
4.4 Pass the brush without cloth over the
surface to bring dirt to the surface.
4.5 Attach the supplied cloth to the floor
brush.
4.6 Go back over the surface to collect the
dirt.
5. CLEANING CARPETS
5.1 Make sure that Section 1 has been followed
and connect the accessories as indicated in
WARNING: if steam is escaping from the sa-
fety cap, switch the appliance off and unplug
it from the mains. Wait for one two for the ap-
pliance to cool before unscrewing the cap
and screwing it back on.
WARNING: Never leave the filling bottle or
the funnel resting on the mouth of the boiler,
with the product connected to the power
supply, since this could cause burns.
WARNING: When first operating steam, the-
re may be some drops of water mixed with
the steam due to temperature imbalances.
Direct the first jet of steam onto a rag.
Before using the appliance on delicate surfa-
ces, ensure that the part in contact with the
surface is free from foreign bodies that
could cause scratches.
Before removing the cloth from the brush,
wait a few minutes to allow the cloth to cool.
WARNING: Do not use the appliance
without the cloth.
WARNING: For additional safety, test steam
delivery on a hidden part, leave the steamed
part to dry to ensure that no changes in co-
lour or deformations have occurred.
WARNING: Before cleaning fabrics with
steam, consult the manufacturer’s instruc-
tions and always carry out a test on a hidden
part or on a sample of the material. Allow
the steamed part to dry to make sure that
no changes in colour or deformations have
occurred.
Before removing the cloth from the brush,
wait a few minutes to allow the cloth to cool.
WARNING: Before cleaning fabrics with
steam, consult the manufacturer’s instruc-
tions and always carry out a test on a hidden
part or on a sample of the material. Allow
the steamed part to dry to make sure that
no changes in colour or deformations have
occurred.
E
N
G
L
IS
H
| 27 |