POLTI SANI SYSTEM CHECK, Инструкция по эксплуатации

Страница: 28 / 32

SANI SYSTEM CHECK
28
ENGLISH
Lubrication of the coupling
Whenever it is difficult to fit the connector ( Q )
and in any case when the device has not
been used for some time, lubricate the cou-
pling on the bottom of the delivery device
(fig.13) with a synthetic lubricant. It you find it
difficult to insert the connector even after lu-
bricating, contact an authorized service cen-
ter.
Tips
In the event of external factors such as, for
example, a sudden change in voltage due to
an upset in the network (failure, lightning,
etc.), the device may be affected by electrical
interference and be subject to temporary mal-
functioning.
To reset the device, switch it off and discon-
nect it from the mains for a few minutes. After
this procedure, start it again normally. If it still
does not work correctly, ask for a check up at
an authorised service centre.
Having the device checked after a problem of
this kind is recommended.
External cleaning
For cleaning the outside of the device we re-
commend using a damp cloth. Do not use
solvents or detergents as these could da-
mage the surfaces. Pay special attention to
the cleanliness of the outside of the device
when moving from one room to another, clea-
ning the wheels too.
WARNING: For all other maintenance pro-
cedures and whenever necessary, contact
an authorised service centre. Do not at-
tempt under any circumstances to disas-
semble the device or to open it.
Two adhesive anti-tampering labels are ap-
plied to the product.
If these labels are re-
moved or damaged by unauthorised per-
sonnel the guarantee will no longer be
valid.
SANI SYSTEM CHECK NO MEDICALE - 1T03 ITA - EN 1T10:A5 31/10/2013 10.12 Pagina 28