POLTI lecoaspira vaporetto FAV50 multifloor, Инструкция по эксплуатации, Страница: 36 / 120

E
N
G
L
IS
H
| 36 |
1.4 Replace the filter unit in the water filter
collector returning it to its original position
(7).
1.5 Reposition the water filter collector in its
housing and turn the handle until it returns to
its starting position (8-9).
1.6 Turn the door of the tank outwards (10)
and fill the tank with approximately 550 ml of
water using the special filler jug (H), at least
until the maximum-level float is visible (11).
Close the door.
This operation must always be carried out
when the boiler has cooled and with the
power cable disconnected from the mains.
1.7 Open the door of the built-in socket and
insert the built-in plug of the flexible
steam/vacuum hose (12).
1.8 Completely unwind the power cable and
connect it to an appropriate mains socket
(13). Always use the product with the cable
completely unwound.
1.9 The appliance is ready for use.
2. CONNECTION OF ACCESSORIES
All the Vaporetto Lecoaspira accessories can
be connected directly to the flexible
steam/vacuum hose or to the extension ho-
ses.
2.1 To connect the specific accessories for the
suction and steaming features proceed as fol-
lows:
Move the locknut of the
accessory, if present, to
the OPEN position and
connect the accessories.
Move the accessory lock-
nut to the CLOSED posi-
tion. Check the strength
of the connection.
On the extension tubes
there is an additional fa-
stening button: proceed
as described previously
for the accessories and release the tubes by
sliding the button as far as the lock position.
2.2 To connect the special accessories only
for suction it is only necessary to attach them
without coupling them to the locknut.
2.3 To connect the steam lance (F) with the
steam concentrator (D), simply screw it on.
The same operation can be carried out for
the coloured brushes (E), which can in turn
be screwed onto the steam concentrator and
onto the steam lance. The different colours
allow you to always use the same brush for
the same surface.
3.
CLEANING HARD FLOORS
(tiles, ceramic surfaces, etc.)
Make sure that you have prepared the ap-
pliance following the instructions listed in
Chapter 1 and connect the accessories listed
in Chapter 2.
3.1 Lock the two extension tubes (C) onto the
handle (A)(15-16).
3.2 For suction only, connect the universal
brush (B)(18) with the bristle frame (B1) (18-
19-20) and press the suction button on the
appliance to proceed with the cleaning ope-
rations (27).
To adjust the suction power, hold the suction
button down (the suction indicators will start
to light up) until the desired suction level is
reached (27).
3.3 For steam cleaning and suction attach the
frame for liquids (B2) to the universal brush
(B)(18-19-20).
3.4 Turn on the boiler by pressing the boiler
button (28) and adjust the strength of the
Add Bioecologico to the water in the water-
filter collector. This anti-foam and deodori-
sing liquid containing natural substances re-
leases a pleasant perfume into the room,
prevents the formation of foam in the water
filter, and guarantees the correct operation
of the appliance (Chapter 15)(6).
WARNING: Incorrectly inserting the water
filter collector can cause a reduction in the
suction capacity.
WARNING : Do not vacuum when the water
filter tank is empty. For vacuuming always
fill the water filter tank (5).
Avoid water leaks. Make sure that the water
does not overflow, to avoid wetting the sur-
face on which your Vaporetto Lecoaspira is
resting.
WARNING: When first operating steam, the-
re may be some drops of water mixed with
the steam due to temperature imbalances.
Direct the first jet of steam onto a rag.
To avoid any dirt in the dirt collector causing
bad smells, we recommend emptying and
cleaning after every use according to the
methods described in Chapter 16
For safety reasons, engage the steam lock
on the handle during vacuuming.