POLTI CIMEX ERADICATOR, Инструкция по эксплуатации

Страница: 28 / 84

ǻ
• Leave the appliance to cool for at least 10
minutes.
• Fill the boiler as indicated in Section 1.
• Carefully screw the safety cap back on,
checking that it is completely closed.
6. GENERAL MAINTENANCE
To clean the outside of the appliance, only
use a damp cloth and tap water. All accesso-
ries can be cleaned using running water, en-
suring they are completely dry before the
next use.
Clean the Steam Disinfector every 10 uses or
if visibly dirty. Clean the dispensing nozzle
using the brush included, sliding it inside the
gun so as to remove any limescale residue in
it (17).
Do not use detergents of any type.
Every 2 months, rinse the boiler with tap wa-
ter.
7. KALSTOP optional (code
PAEU0094)
Kalstop is thelimescale product for applian-
ces with boiler for ironing and steam clea-
ning.
Regular use of Kalstop, every time the tank is
filled with water:
- Extends the life of the appliance.
- Allows emission of a “drier” steam
- Prevents limescale build up.
- Protects the walls of the boiler.
- Contributes to saving energy.
HOW TO USE KALSTOP
7.1 Open the bottle and pour half the contents
into the boiler filled previously with water.
7.2 Continue with the rest of the operations li-
sted in Section 1 “Preparation for use”.
Kalstop is on sale at household appliance sto-
res, at Polti authorised service centres or on
the site www.polti.com.
8. STORAGE
8.1 Turn off the appliance and disconnect
from the mains electricity.
8.2 Wait for the appliance to cool down comple-
tely before storing it.
9. INCREASE THE VERSATILITY OF
CIMEX ERADICATOR WITH THE
STEAM CLEANING KIT (Code
PAEU0269)
Cimex Eradicator can turn into a Vaporetto,
the Polti steam cleaning system for every sur-
face in the house. With Vaporetto you clean
and sanitise all types of floors, carpets, sofas
and mattresses, bathroom and kitchen. The
PAEU0269 steam cleaning kit is sold at Polti
authorised Service Centres and on the site
www.polti.com.
WARNING: If, during unscrewing, the cap
spins freely or if steam is escaping, immedia-
tely stop the operation, ensuring that the
boiler is switched off and the power cable is
unplugged from the mains. Wait for the ap-
pliance to cool (two hour) and unscrew the
cap before removal. TAKE CARE OF YOUR
FACE !!!
WARNING: Perform these operations when
the appliance is turned off, cold and discon-
nected from the mains or disconnected from
Cimex Eradicator.
When the water is particularly hard, use
greater concentrations (up to one phial per
litre of water).
EN
GL
ISH
| 28 |
VT CIMEX ERADICATOR - M0S11512 - 1R05_FEV 1000-950.qxd 05/06/2017 17:14 Pagina 28