POLTI CIMEX ERADICATOR, Инструкция по эксплуатации

Страница: 27 / 84

쭆
ʄ 
2.
STEAM ADJUSTMENT
You can optimise the steam flow by means of
the steam adjustment knob located on the
steam generator (11). To increase the flow,
turn the knob in an anticlockwise direction.
Turning it in a clockwise direction reduces the
flow. For maximum efficiency, set the adjust-
ment knob to the
maximum level
.
3. USE OF STEAM DISINFECTOR
The steam dispenser has a safety switch whi-
ch prevents the accidental activation of
steam delivery by children or people unaware
of its operation. Should the appliance be left
momentarily unguarded, move the safety
switch to the off position (12). To continue
steam delivery, move the switch back to its
original position (13).
3.1 Direct the steam downwards for 2 seconds
in order to bring all the components of the
appliance to their correct temperature, in or-
der to avoid condensation.
3.2 Position the Steam Disinfector in a posi-
tion perpendicular to the surface to be trea-
ted and keep it at the distance provided by
the spacer bracket / holder to avoid direct
contact in case of delicate material (14).
3.3 Deliver the steam on a continuous move-
ment, using “brushing” movements to cover
the surface to be treated. In this way the flow
of dry steam at high temperatures will kill the
bugs, devitalising their eggs on all treated
surfaces.
Cimex Eradicator delivers dry saturated steam
at high temperatures that will dry without lea-
ving residues within 30 seconds to 1 minute,
depending on environmental conditions.
3.4 Connect the accessories depending on the
use:
Straight flow concentrator,
for a concentra-
ted jet.
Curved flow concentrator
to reach difficult
places.
Just bring the accessory chosen into line with
the delivery device nozzle and rotate the ac-
cessory until it locks into place (15).
Please refer to the Rapid Guide to Disinfesta-
tion and the DVD located in the package for
instructions on how to find and remove bed
bugs.
4. HPMED
The characteristics of the HPMed detergent
make it the ideal aid to the action of dry satu-
rated steam at high temperatures delivered
by Cimex Eradicator.
HPMED is a water-alcohol solution that remo-
ves the bad smells generated by bed bugs.
HPMED can be dispensed when people are
present. HPMED, mixed with the steam flow
makes it possible to successfully remove the
eggs, organic traces due to bed bug faeces
and to completely eliminate the characteristic
odour of these insects.
Contains <5% non-ionic surfactant. (EEC Reg.
648/2004).
Contents: 50 ml
HPMED is sold at authorised Polti Service
Centres and on the site www.polti.com.
5. OUT OF WATER
The lack of water in the boiler is indicated by
the flashing of the indicator light ( ) and the
buzzer.
To continue with use, proceed as follows:
• Turn off the boiler switch ( ) and the accessory
switch ( ).
•
Unplug from the mains electricity.
• Wait at least 10 minutes and remove the sa-
fety cap, unscrewing it without force.
WARNING:
- Keep out of the reach of children.
- IF SWALLOWED: Rinse mouth DO NOT in-
duce vomiting. Immediately contact a
POISON CENTRE or a doctor.
- Avoid contact with eyes, skin or clothing.
- Avoid releasing into the environment.
- Dispose of in conformity with local regula-
tions.
WARNING: Never fill the boiler as soon as the
safety cap is opened. The boiler is still hot,
even if the appliance is unplugged. On con-
tact with the hot, empty boiler, cold water will
evaporate producing a spray of steam which
could cause burns. Only fill the boiler when it
is cold and always keep your face away from
the boiler opening when filling.
WARNING: Steam.
Risk of scalding!
WARNING: For additional safety, test steam
delivery on a hidden part, leave the steamed
part to dry to ensure that no changes in co-
lour or deformations have occurred.
WARNING: When first operating steam, the-
re may be some drops of water mixed with
the steam due to temperature imbalances.
EN
GL
ISH
| 27 |
VT CIMEX ERADICATOR - M0S11512 - 1R05_FEV 1000-950.qxd 05/06/2017 17:14 Pagina 27