Polsen ULW-96, Руководство по эксплуатации продукта

Страница: 20 / 24

20
Problem Possible Cause Solution Comment
The unit will not
turn on. The batteries are
dead. Replace or recharge the batteries. Make sure to bring extra batteries with you.
There is no audio
or the audio is
intermittent. The batteries in
one of the units
are dead. Replace or recharge the dead batteries in the proper
unit. Make sure to bring extra batteries with you.
The audio cable
is unreliable,
or the cable or
microphone is
unplugged. Check the audio cable to make sure it is reliable and
is not shorting.
Check all cables to make sure they are completely
plugged into the proper inputs.
The line source is
off or not playing
back audio. If you are transmitting a line-level signal, make sure
there is audio coming out of the line-source device.
The line-level
input overrides the
microphone input. If you want to record via the microphone input, make
sure there is nothing plugged into the line-level input.
The audio levels
are too low. Turn up the microphone level on the transmitter.
Make sure it’s not set to Mute.
Adjust the headphone level on the receiver and listen
to make sure the signal is transmitting.
Turn up the input levels on your camera, recording
device, or mixer.