Polsen ULW-96, Руководство по эксплуатации продукта

Страница: 11 / 24

11
Important
!
Use only rechargeable batteries when charging. Do not attempt to charge alkaline batteries
—
this can damage the unit
and void the warranty.
Battery Power Icon
:
The battery power icon on the LCD ( ) indicates the remaining battery power. When only one bar appears in
the icon ( ), battery power is low and we recommend changing or recharging the batteries. When the battery power icon is empty
and blinking ( ), the batteries are almost out of power, and you will need to change or recharge the batteries at this point.
Note : Insufficient battery power can decrease the ULW-96’s ability to transmit and receive. Be prepared
:
make sure your batteries
start out with a full charge when using this system, and always carry spare batteries.
OPERATING INS TR UCTIONS
Testing the RF Environment
Before you hook up the ULW-96 to your camera and talent, it is important to test and set initial parameters in order to reduce the
possibility of RF interference or noise
:
1. Turn on the receiver. The RF LED will glow red as the receiver turns on.
2. If the RF LED changes from red to green, there is interference on this channel. Change the channel, repeating as necessary until
you find a channel that is free of interference.