Polsen ULW-96, Руководство по эксплуатации продукта

Страница: 21 / 24

21
Problem Possible Cause Solution Comment
There is no audio
or the audio is
intermittent. The transmitter
and receiver are
set to different
channels. Make sure the transmitter and receiver are set to the
same channel.
One of the units is
not turned on. Make sure the transmitter, receiver, and all other
devices in your audio chain are turned on and
configured to the proper settings.
Too much
ambience is
being picked up. When using an
omnidirectional
microphone like the
one included with
this system, the
microphone may
be picking up too
much ambience. Make sure the microphone is as close as possible to
the subject.
Approximately 6
"
(15.2 cm) from the subject is
usually good microphone placement, but you may
need to experiment.
FCC S TATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions
:
(1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause undesired operation.
THIS DEVICE COMPLIES WITH PART 90 OF THE FCC RULES. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
FCC Caution
:
To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate this equipment. (Example
—
use only shielded interface cables when connecting to computer or peripheral devices).
FCC ID
:
NTMEJ-7XT