Polsen ULW-96, Руководство по эксплуатации продукта

Страница: 14 / 24

14
2. Set the handheld transmitter and the receiver to the same channel. If you are experiencing interference or noise on one channel,
try a different channel.
Note
:
If you are using multiple ULW-96 wireless systems, make sure each system is set to a different channel
—
at least three
channels apart as a guard band.
3. With the headphone volume low, plug your headphones into the receiver and gradually raise the level to a comfortable volume
for monitoring the transmission.
4. Adjust as necessary to make sure an ample level is being transmitted to the receiver. The objective is to transmit the highest
possible level without distortion for the best signal-to-noise ratio throughout the signal path.
5. Once you have determined the transmission quality and level are good, mount the receiver.
Note
:
When holding the handheld transmitter, hold it by the body of the transmitter. Holding
the antenna will degrade the transmission quality.