POLMAR Shark2, Руководство пользователя

Страница: 96 / 108

96
6.9.3 Enter your ATIs mmsI
This is a once-only operation.
You must enter your ATIS MMSI first then you can access the ATIS functions.
Select DSC SETUP then ATIS MMSI and press the CH knob. If an existing
MMSI is stored, the –values appear.
1. If the MMSI is blank, a dashes line appear, except for the initial ’9’ Enter
ATIS MMSI along the dashed line. Press the CH knob to confirm each cor -
rect entry to move to the next digit.
2. If your make an error, press until < appears, then press the CH knob to
backup and correct the entry.
3. Hold the CH knob to store your ATIS MMSI.
4. Enter your ATIS MMSI again as a password check, hold the CH knob to
permanently store the your ATIS MMSI and return to the menu.
5. You can view your stored ATIS MMSI at anytime by selecting ATIS MMSI
in the DSC SETUP menu.
6.9.4 ATIs enable
When ATIS is enabled, the following occurs:
• DSC function are disabled.
• DUAL watch, Tri Watch and scan functions are disabled.
• The following international channels are limited to 1 watt output power: 6,
8, 10, 11, 12, 13, 14, 15, 17, 71, 72, 74, 75, 76, 77 (and 31, if enabled).
To enable/disable ATIS:
1. Select DSC SETUP, then ATIS ENABLE, Press the CH knob to displays ATIS
ENABLE ON/OFF.
2. Select ON for turn on ATIS function.
3. Press the CH knob to confirm your choice and return to the menu.
INPuT ATIs
mmsI
9 _ _ _ _ _ _ _
_ _
ATIs mmsI
INPuT AGAIN
9 _ _ _ _ _ _ _
_ _
ATIs mmsI
9100000053
>sTORE
cANcEl
dsc sETuP
GROuP sETuP
ATIs mmsI
>ATIs ENAblE
dIsPlAy NAmE
>ON
Off