POLMAR Shark2, Руководство пользователя

Страница: 71 / 108

71
4.5 scan
Scanning is an efficient way to locate signals quickly over a wide frequency range.
The transceiver has 4 Scan mode available: All scan, FAV CH scan, Priority
scan, Priority FAV CH scan. Default is normal all scan(1.2.3.4……)
1. Press and hold scAN key over 3 sec, the Priority scan icon ( 1, 16, 2, 16,
3, 16… ) will be selected. PscAN mode will be appear on LCD. Press and
hold scAN key over 3 sec. to turn it back to normal scan, the scan mode
icon will be display.
2. During the scAN modes:
3. Press scAN key again will terminate the scan operation and stop at the
current channel. It also can be to cancel by 16 or PTT .
4.6 Watch
4.6.1 dual watch
Press Watch key to activate the DUAL WATCH mode. Monitor the current chan -
nel and Ch 16 in cycle. icon will appear on the LCD.
4.6.2 Tri-watch
Press and hold Watch key to activate the TRI WATCH mode.
Monitor the current channel, CH 16 and CH 9 in cycle. icon will be turn ON.
To quit the mode, press WATCH, 16, CANCEL key, press PTT key to TX mode
of current channel
4.7 Position indication
Your transceiver can display the position of the vessel’s (longitude and lati -
tude) as well as time and date information, if connected to a GPS receiver; if
no GPS equipment to be connected and alert tone of 10 sec. duration with can
cancelled by any button is sounded at 4 hour intervals to encourage manual
input of positional data.
Once no manual input is made for 23.5 hours, GPS disappears from the screen,
the position data transmitted goes to 9’s and all the time data goes to 8’s
dIsTREss
23°20.1234 N
100°15.1002 E
08:10Pm lOc