Polk Audio XRt12, Руководство по индивидуальной установке

Страница: 4 / 10

Polk Audio XRt12 CI Guide Page 4 1/19/05
Revision 3.0
II.
IR Codes & Remote Controls:
CODES:
The following IR codes are accepted by the Polk Audio XM Reference Tuner -
XRt12
Code Type: Extended RC5 or RC5x
Key No. Function System
Code (DEC)
Command Code
(DEC)
Mode or Data
(DEC)
1 Power On/Off (toggle) 27 12 00
- Discrete Power On 27 50 00
- Discrete Power Off 27 51 00
2 Select
S
27 32 00
3 Category _ 27 49 00
4 XM – Enter 27 35 00
5 Category ` 27 48 00
6 Select
T
27 33 00
7 Mute 27 13 00
8 Preset/Direct 27 34 00
9 Jump 27 62 00
10 “ 1 “ 27 01 00
11 “ 2 “ 27 02 00
12 “ 3” 27 03 00
13 “ 4 “ 27 04 00
14 “ 5 “ 27 05 00
15 “ 6 “ 27 06 00
16 “ 7 “ 27 07 00
17 “ 8 “ 27 08 00
18 “ 9 “ 27 09 00
19 Display 27 58 00
20 “ 0 “ 27 00 00
21 Menu 27 53 00
Remote Controls:
The IR codes for the XRt12 are RC5x which includes a toggle bit as part of the code.
As a result, a single press of a key will send out a toggle bit of 0 + the IR code, the
second press of the same button will send out a toggle bit of 1+ the IR code. The
toggle bit may cause some confusion when programming a learning remote control if
the learning remote does not have the capability to learn RC5x codes. If your
learning remote does not accept RC5x codes then the remote will need to be
programmed as follows and the tuner must be running Version 35 or later software:
To teach a non-RC5x compatible remote: