13
【
PASSWORD MANAGEMENT
】
1. Password Management
Password Enter:
1) Press"SELECT" key, the panel shows "12345".
2) Press"SETUP" key, the panel display as "1-345", "_" is a modify command to set
number, press the "SETUP" key, "_" can be recycled to the right.
3) Press "SELECT" key, as plus key when setting the password number with "_" .
4) After entering the correct password, press"ENTER"key.If display as"00000",
means the password is set up; If display as "E0000", means the password is wrong,
need press "ENTER" key to re-enter the correct password.
5) Then press "ENTER" key, display as "d-01", then press "SELECT" key to enter the
next step.
Password Change:
①
Press"SELECT" key when display as "12345", if changed the password, enter your
password. Steps please refer to details of Password Enter above.
②
If forget password, press"SETUP" → "SELECT" to change "E0000" into "88888"
then press"ENTER", and display as "00000", press "SELECT" to enter the number,
press"SETUP" to change next number
6) Enter the password to be set, press "ENTER" key, there will be"A-6" for 6-zones,
"A-18" for 18-zones, "A-33" for 33-zones, press"ENTER" key, then the password is
set up.
7) If forget password, long press"ENTER" can restore to the initial password
"123456".
2. Zones Distinction:
1)
6-zones:
from bottom to the top is 1~6 zone evenly distributed.
①
1~6 zone sensitivity, the sensitivity is proportional to its numeric.
②
"H" is overall sensitivity, the sensitivity is proportional to its numeric.
2)
18-zones and 33-zones:
from bottom to top is 1~18/1~33 zone evenly distributed.
①
1~18/1~33 zone sensitivity, the sensitivity is proportional to its numeric.
②
"H-xxx" is overall sensitivity, the sensitivity is proportional to its numeric.
【
OPTIONAL FUNCTIONS
】
PC Networking, Turnstile Integration, UPS, Camera, etc.
