background image

User Guide

  

P. 9

 

 

Turn the ignition key to the 

IGNITION ON (RUN)

 position. (

Do not turn the key 

to the 

CRANK

 

position while the engine is running. This would cause the starter motor to re-engage.) 

 

Press the brake pedal to disengage the remote starter unit. 

You are now ready to drive off. 

Using the System 

Arming and Disarming the System 

To disarm the alarm and Starter Kill (if installed) and unlock the doors (if installed): 

1.

 

Press and hold the 

UNLOCK

 button for approx. 1 sec. 

You will hear 

two chirps 

if the Siren or Horn is so configured. 

2.

 

The  icon will light up on the LCD display of the remote control. The parking lights will 

flash 

twice 

and the L.E.D. will go out to confirm that the doors have been unlocked and that the 

Starter Kill (if installed) and the alarm are disarmed. 

In Passive Mode, the System will rearm automatically 30 seconds after unlocking unless the key is 

meanwhile inserted in the ignition switch (see description of 

Passive Mode

 later in this Guide). 

To arm the alarm and Starter Kill (if installed) and lock the doors (if installed): 

1.

 

Press and hold the 

LOCK

 button for approx. 1 sec. 

You will hear 

one chirp 

if the Siren or Horn is so configured. 

2.

 

The 

 

icon will light  up on the LCD display of the remote control. The parking lights will 

flash 

once

 and the L.E.D. will flash slowly to confirm that the doors have been locked and that the 

Starter Kill feature (if installed) and the alarm are armed. 

Idle Mode 

Convenience feature:

 Idle Mode allows you to keep the engine running and the doors 

locked while you stop, for example, at a convenience store or for a short delivery. 

This feature allows you to let the remote starter take over control of the vehicle (i.e. no Key in the 
Ignition Switch) while the engine is running. For example, if you stop for a delivery or at a conveni-

ence store, lock your vehicle and leave it running for the length of a run cycle while you are away. 

To leave the vehicle in Idle Mode: 

1.

 

With the engine running, press the 

LOCK

 or 

UNLOCK

 button (to unlock the doors) or the 

START/STOP

 button on the remote control until the parking lights come on. 

2.

 

Remove the key and exit the vehicle. The engine will go on running. 

3.

 

Lock the doors if needed. 

The engine will go on running until the user re-enters the vehicle or until the expiration of the 
Engine Run Time . 

Caution!!!

 Do not leave children or pets unattended in a vehicle standing in Idle Mode. 

Turbo Mode 

If Turbo Mode is configured at installation, it will allow a turbocharger to idle down after the user 
leaves the vehicle: the unit will take over the vehicle and keep it running for 60 seconds (or until it 

is shut down by remote control), then shut down the engine. 

Proceed as follows to set the system to Turbo Mode: 

1.

 

With the engine already running, press the 

LOCK

 button on the transmitter until the 

parking lights come 

ON

2.

 

Remove the ignition key from the ignition switch. 

The engine will go on running.

 

3.

 

Exit the vehicle and close the door. 

Содержание PS-7020 TW

















Отзывы: