P. 12
User Guide
•
Start the engine by remote.
•
Turn the ignition key to the
IGNITION ON (RUN)
position.
•
Press and hold the
START/STOP
button for 3 sec.
(the parking lights will flash once)
.
Once any of the above conditions are true, the
icon will disappear from the display upon
pressing the
LOCK
or
UNLOCK
button
.
To verify whether the system is in Cold Weather Mode:
•
Press and release the brake pedal:
If the vehicle is in Cold Weather Mode, the parking lights will stay on while the pedal is
pressed.
Temporary Chirp Delete
To temporarily disable the chirp confirmations of the siren upon arming and disarming (e.g. in a
quiet neighbourhood):
1.
Press the
TRUNK
button.
2.
Within 3 sec., press the
LOCK
or
UNLOCK
button to arm or disarm without any chirps.
Advanced Features: Installation-programmable Options
The System was designed with flexibility and OEM integration in mind. With its programmable
options, this unit can single-handedly control nearly any electrical system in your vehicle.
Caution
:
The programming of your system should be left to a professional. Changing any
one of the settings may affect the operation of your System.
The installation-programmable options are as follows:
•
Remote Door Locks
•
Priority Door Access
•
Passive or Active Arming
•
Starter Kill / Anti-grind feature
•
Shock Sense and Warn-away
•
Disarmed Notification
•
Siren / Horn Chirps
•
Car Finder
•
Siren / Horn Chirp Timing
•
Safe Start
•
Ignition-controlled Door Locks
•
Ignition Re-lock
•
Secure Lock
•
Turbo Mode
•
Remote Trunk Release
•
Engine Run Time
•
Multi-car Operation
Remote Door Locks
If your System was installed with the Remote Door Locks option, you will have the convenience of
remote keyless entry. See section
Arming and Disarming the System
, earlier in this Guide, for
further instructions on remote door locking and unlocking.
Priority Door Access
(Enabled by default.) If the Remote Door Locks option is installed on your vehicle, this safety
feature allows you unlock solely the driver’s door with a single press of the
UNLOCK
button on the
transmitter; upon a second press of the
UNLOCK
button, all the other doors will unlock.
Active or Passive Arming
(Passive Mode by default.) The alarm and Starter Kill can be configured either to Passive Mode (so
as to arm automatically) or Active Mode (so as to require user intervention for arming). By default,
your System is configured to
Passive Mode
. In Passive Mode, the alarm and Starter Kill will
automatically arm
30 seconds
after the last door is closed. The System will not arm if a door is left
open, or if you re-open a door within the 30-second delay.
Important note:
When the System re-arms automatically or if there is an alarm condition, you
can disarm the When the System by simply pressing the
UNLOCK
button.
