P. 4
User Guide
The
FUNCTION
(
) button is used to access all advanced functions of the Remote Control.
(Refer to the LCD Operation and Confirmations tables.)
Alarm Clock
The LCD Remote Control has a built-in Alarm Clock which can be set up using the
but-
ton. Use the
and
buttons to switch the Alarm Clock on and off (refer to the tables).
Time Adjust Mode
Use Time Adjust Mode to set the current time on your Remote Control using the
button
(refer to the tables).
Countdown Timer
This feature allows set up a countdown of a duration entered by the user in hours and
minutes using the
button (refer to the tables).
Parking Countdown
This version of the Countdown feature is particularly useful for keeping track of parking
meter time: the user may quickly set up the countdown in slices of 10 or 30 minutes using
the
and buttons (refer to the tables).
Melody Selection
The Remote Control allows the user to select which melodies are to be used upon the
following events: remote starting of the vehicle, the Alarm, ending of the countdown,
entering Cold Weather Mode. Melodies for these various events can be selected using the
button (refer to the tables).
Vibration Mode
Use this feature to replace audible signals with a vibration signal. Use the
and
buttons to switch Vibration Mode ON and OFF (refer to the tables).
Power Saving Mode
When set to Power Saving Mode, the Remote Control will cease polling the Remote Starter
Module on a regular basis for status information. This will extend battery life. Use the
and
buttons to switch Power Saving Mode ON and OFF (refer to the tables).
Remote Control Finder
This function allows the user to locate the Remote Control when it has been accidentally
dropped near the vehicle. Pressing the Valet Button and holding it down for 3 seconds (or
until the Parking Lights flash five times) will cause the Remote Control to start beeping for
one minute. The beeping will stop by itself after one minute, or it can be switched off by
pressing the Lock (
) or the Unlock (
) button on the Remote Control.
