30
13.Turn the autofocus feature off and set the distance to infinity as follows:
•
Press the MODE button until only the autofocus symbol (AF) is visible in the LCD
display.
•
Press the up or down arrow button to remove the bar from beneath the autofocus
symbol. The display will show either “5.0FT” or “1.6M”.
•
Press the MODE button. The “5.0FT” or “1.6M” will begin to flash.
•
Repeatedly press the down arrow button until the infinity symbol replaces either
“5.0FT” or “1.6M”.
•
Press the MODE button to return to a full display.
If the flash or audio features need to be turned off, press the MODE button until
the symbol for the desired feature is displayed. Then press the up or down arrow
button to remove the bar from beneath the symbol. (No bar beneath the symbol
indicates that the feature is off.)
Note: The display automatically turns off after 30 seconds to conserve power.
To turn it on again, press the MODE button or the shutter button.
14.With the camera aimed toward you, press the S1/S10 button all the way. (The
photocell should remain covered with the black photographic tape and the soldering
aide should still be inserted into the flapper door area.) The following should happen:
•
The warning beeps should sound.
•
There should be no strobe fire.
•
The moving Quintic lens frame should swing down below the level of the shutter
and should be visible through the open flapper door (Figure 3-6). This is the
infinity Quintic position.
•
The shutter blades should open and stay open for the maximum time-out of 2.8
seconds.
•
The camera motor should run.
•
The Frames Remaining number should change from “2” to “1” on the LCD control
panel.
Содержание Spectra/Image One Board
