24
6)
The rechargeable battery is designed and manufactured to be used and recharged
frequently.
As with all batteries, the capacity of the battery declines each time it is charged/depleted. To prolong
the battery’s life, follow the suggestions below:
● Use your SMTP01 at least once a week
● Charge the battery regularly and fully
● never leave the battery fully discharged for a long period of time
● Always keep the device and the battery away from heat (+40
℃
)
Charge battery
Plug the power adapter into an electrical wall outlet, and then connect to the device to fully charge
the battery before use (A full charge takes about 3 hours in the off status)
When fully charged, the battery icon displays as
A fully discharged battery takes approximately 3 hours to fully charge in the off status, but the
device may be used while plugged if desired.
Important Safety Precautions
Always follow these basic safety precautions when using your SMTP01. This reduces the risk of
fire, electric shock, and injury.
Do not expose this product to rain or moisture
Keep the device out of direct sunlight and heat sources
It is recommended that users use the print function in an external
environment that does not exceed 30° C. When the external environment
exceeds 45° C, printing will be prohibited.
Protect the power cord. Route power cords so that they are not likely to be
walked on or pinched by items placed on or against them. Pay particular
attention to the point where the cord attaches to the device
Only use the AC adapter included with the device. Using any other power
adapter voids your warranty
Do not remove the cover. There are no user-serviceable parts inside
Do not plug HDMI when using Camera
Do not look directly into flash from close range as this may result in visual
impairment
Do not abuse the LCD display which could result in internal LCD screen glass
damage and/or leakage. If liquid crystal material gets into eyes, use copious
amounts of water to flush eyes immediately and seek medical attention
The SMTP01 camera is a high precision device. Please do not drop, knock, or
press heavily as this is likely to damage the camera.
Do not wrap the camera in the clothing, blankets or anything else which may
inhibit heat loss. Excessive heat may cause distortion of the shell, and may
cause personal injury. Please use the camera in a well-ventilated environment.
Do not place the camera in locations which may be subject to high
temperatures as this may result in product damage and/or poor performance.
Before moving the camera, disconnect all lines and cables. Failure to do so may
