Polaris UTV Series 10 2x4, Руководство пользователя

Страница: 71 / 105

69
MAINTENANCE AND LUBRICATION
Cooling System
Radiator Coolant Level Inspection
1. Lift the hood and locate the
radiator cap(1).
2. Visually inspect the level of
coolant in the radiator.
3. Using a funnel, slowly add
coolant if necessary.
NOTE: This procedure is only
required if the cooling system has
been drained for maintenance
and/or repair. However, if the
overflow bottle has run dry, the
level in the radiator should be
inspected and coolant added if necessary.
NOTE:
Use of a non-standard pressure cap will not allow the
recovery system to function properly. If the cap should need
replacement, contact your dealer for the correct replacement part.
Changing Coolant
To ensure that the coolant maintains its ability to protect the engine,
the system be completely drained every two years, and a fresh mixture
of antifreeze and water should be added. Polaris recommends the use
of Polaris Premium 60/40 anti-freeze/coolant or a 50/50 mixture of
high quality aluminum compatible anti-freeze/coolant and distilled
water.
NOTE: Polaris Premium 60/40 is already premixed and ready to use.
Do not dilute with water.
NOTE: Always follow the manufacturer’s mixing recommendations
for the freeze protection required in your area.
Never remove the pressure cap when the engine is warm or hot.
Escaping steam can cause severe burns. The engine must be
cool before removing the pressure cap.
WARNING
1