Polaris UTV Series 10 2x4 Скачать руководство пользователя страница 70

Страница: 70 / 105

MAINTENANCE AND LUBRICATION

Cooling System

Coolant Level Inspection

NOTE:

Check the coolant

level when the engine is cold

(room or atmospheric

temperature).
1. Situate the vehicle on

level ground.

2. Check the coolant level

by looking at the

overflow bottle located in

front of the right front

wheel. The coolant level

should be between the

minimum mark (1) and

the maximum mark (2).

3. If the amount of coolant

is not within the operating

range, lift the hood and locate the overflow bottle lid. Remove the

lid and use a funnel to add coolant through the filler opening until

the fluid level has reached the maximum mark. Reinstall the cap.

NOTE:

Polaris recommends the use of Polaris Premium 60/40

anti-freeze/coolant or a 50/50 mixture of high quality aluminum

compatible anti-freeze/coolant and distilled water.

NOTE:

Polaris

Premium 60/40 is already premixed and ready to use. Do not dilute

with water.

NOTE:

Always follow the manufacturer’s mixing recommendations

for the freeze protection required in your area.

NOTE:

In an emergency you can add water alone to the overflow

bottle, but it must be returned to the correct mixture ratio by adding

antifreeze concentrate as soon as possible.

CAUTION

If coolant must be added often, or if the overflow bottle runs

completely dry, there may be a leak in the system. Have the

cooling system inspected by your Polaris UTV dealer.

Содержание UTV Series 10 2x4










































































































Результаты поиска

Содержание UTV Series 10 2x4

Отзывы:

Бренды по названию

Популярные бренды

Polaris UTV Series 10 2x4, Руководство пользователя

Результаты поиска

Содержание UTV Series 10 2x4

Отзывы:

Бренды по названию

Популярные бренды