Polaris UTV Series 10 2x4 Скачать руководство пользователя страница 66

Страница: 66 / 105

MAINTENANCE AND LUBRICATION

Oil System

Oil and Filter Change (cont.)

14. Reinstall drain plug.
15. Remove dipstick and add two quarts (1.9 l.) of Polaris Premium 4

synthetic oil. Reinstall dipstick.

NOTE:

If sump is not drained,

add about 1 3/4 quarts initially.

16. Place gear selector in neutral and set parking brake.
17. Start engine and let it idle for one to two minutes. Stop engine and

inspect for leaks.

18. Re-check oil level on the dipstick and add oil as necessary to bring

the level to the upper mark on the dipstick.

19. Dispose of used filter and oil properly.

4 Cycle Premium 4 Synthetic Lubricant

Polaris Premium 4 All Season Synthetic engine oil has been specially

formulated for use in Polaris 4 cycle engines. It is a fully synthetic,

high performance, multi-viscosity oil designed to provide the ultimate

in lubrication performance and protection.
Premium 4 possesses unsurpassed film strength over the widest

possible temperature range. It resists viscosity and frictional

breakdown in ambient temperatures from -40

F. to 120

F. Its

exceptional frictional properties result in more efficient operation, more

power output and lower fuel consumption.
Although Polaris Premium 4 is the only oil recommended for use in

this engine, use of any API certified “SH” oil is allowable. Oil may

need to be changed more frequently if Polaris Premium 4 is not used.

Follow the manufacturer’s recommendations for ambient temperature

operation.

Fuel Filter

Your Polaris UTV is equipped with an in-line fuel filter that should be

replaced by your dealer after every 100 hours of operation.
Do not attempt to clean these filters.

Содержание UTV Series 10 2x4










































































































Результаты поиска

Содержание UTV Series 10 2x4

Отзывы:

Бренды по названию

Популярные бренды

Polaris UTV Series 10 2x4, Руководство пользователя

Результаты поиска

Содержание UTV Series 10 2x4

Отзывы:

Бренды по названию

Популярные бренды