103
MAINTENANCE
Carburetor/Engine Idle RPM Adjustment
4-cycle Engines
If the engine idle speed is not satis-
factory, and all other conditions are
favorable, the carburetor can be ad-
justed as follows:
1.Warm up the engine by running the
vehicle approximately five min-
utes.
2.Place the transmission in gear with
the parking brake applied.
3.Adjust the carburetor idle screw in
or out until the desired idle RPM is
reached. Turning the screw in
(clockwise) will raise RPM. Turn-
ing the screw out (counterclock-
wise) will lower RPM.
Throttle Cable Free Play Adjustment
Throttle cable free play is adjusted at the handlebar.
1.Slide the bolts off inline cable adjuster sleeve. Loosen adjuster locknut.
2.Turn adjuster until 1/16
″
to 1/8
″
freeplay is achieved at thumb lever.
3.Tighten locknut and slide boots over cable adjuster until they touch at the middle
point of adjuster.
Idle Screw
Boot
Adjuster
Sleeve
Locknut
Boot
Содержание Universal ATV 2000
Страница 12: ...4 SAFETY WARNING AND OPERATION DECALS 1 7077919 E1997...
Страница 13: ...5 SAFETY WARNING AND OPERATION DECALS 2...
Страница 15: ...7 SAFETY WARNING AND OPERATION DECALS 4 7 6 7 3 5...