Polaris Trail Touring 2006 Скачать руководство пользователя

Страница: 18 / 159

SAFETY

Operator Safety

Ice and Snow Build-up

Before driving, manually turn the skis to the left and right to be sure ice

and snow are not interfering with full left and right steering. If diffi-

culty is encountered, remove ice and snow build-up that may be

obstructing the steering linkage.

Driving on Slippery Surfaces

WARNING

Ice and snow build-up may interfere with the steering of your machine, result-

ing in serious injury or death. Keep the underhood area free of snow and ice.

WARNING

Driving on ice or hard-packed snow reduces steering and braking control,

which may result in loss of control and serious injury or death. Never attempt

an abrupt change of direction when operating on slippery surfaces. Slow

down and use extra caution when operating on slippery surfaces.

Содержание Trail Touring 2006
































































































































































Результаты поиска

Содержание Trail Touring 2006

Отзывы:

Похожие инструкции для Trail Touring 2006

Бренды по названию

Популярные бренды

Polaris Trail Touring 2006, Руководство пользователя

Результаты поиска

Содержание Trail Touring 2006

Отзывы:

Похожие инструкции для Trail Touring 2006

Бренды по названию

Популярные бренды