Polaris Trail Touring 2006 Скачать руководство пользователя

Страница: 147 / 159

144

WARRANTY

Limitations of warranties and remedies

ALL IMPLIED WARRANTIES (INCLUDING BUT NOT LIMITED TO THE

IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PAR-

TICULAR PURPOSE) ARE LIMITED IN DURATION TO THE ABOVE ONE YEAR

WARRANTY PERIOD. POLARIS FURTHER DISCLAIMS ALL EXPRESS WAR-

RANTIES NOT STATED IN THIS WARRANTY. Some states do not allow limita-

tions on how long an implied warranty lasts, so the above limitation may not apply to

you if inconsistent with controlling state law.

How to Obtain Warranty Service

If your snowmobile requires warranty service, you must take it to a Polaris dealer autho-

rized to repair Polaris snowmobiles. When requesting warranty service you must

present your copy of the Warranty Registration form to the dealer. (The cost of trans-

portation to and from the dealer is YOUR responsibility). Polaris recommends that you

use your original selling dealer; however, you may use any Polaris Servicing Dealer to

perform warranty service.
Please work with your dealer to resolve any warranty issues. Your dealer will contact

the appropriate personnel at Polaris if additional assistance is needed.
This warranty gives you specific legal rights, and you may also have other rights which

vary from state to state.
If any of the above terms are void because of state or federal law, all other warranty

terms will remain in effect.

Engine Oil

1. Mixing oil brands or using non-recommended oil may cause engine damage. We

recommend the use of Polaris engine oil.
2. Damage resulting from the use of non-recommended lubricants may not be covered

by warranty.

Содержание Trail Touring 2006
































































































































































Результаты поиска

Содержание Trail Touring 2006

Отзывы:

Похожие инструкции для Trail Touring 2006

Бренды по названию

Популярные бренды

Polaris Trail Touring 2006, Руководство пользователя

Результаты поиска

Содержание Trail Touring 2006

Отзывы:

Похожие инструкции для Trail Touring 2006

Бренды по названию

Популярные бренды