Polaris Trail Touring 2006 страница 25 Скачать руководство пользователя

Страница: 25 / 159

SAFETY

Safety Decals and Locations

Warning decals have been placed on the snowmobile for your protec-

tion. Read and follow the instructions of the decals and other warnings

on the snowmobile carefully. If any of the decals depicted in this man-

ual differ from the decals on your snowmobile, always read and follow

the instructions of the decals

on the snowmobile.

If any decal becomes illegible or comes off, contact your Polaris dealer

to purchase a replacement. Replacement

safety

decals are provided by

Polaris at no charge. The part number is printed on the decal.

Clutch Cover Warning

This warning decal is found under the hood on the clutch cover:

WARNING
Do not operate engine with hood open.
Do not attempt adjustment with engine running.
Do not operate engine with plenum/belt guard removed.
Never run engine with drive belt removed.
Never service clutches yourself -- see your dealer.

Airbox Warning

This warning decal is found under the hood on applicable models:

CAUTION
Do not operate above 40 mph with hood-to-airbox foam removed

or engine failure will result.

Pressure Cap Warning

This warning decal is found on the coolant bottle cap of liquid cooled

models:

WARNING
Do not open hot. Test or replace when changing coolant. Press

down and turn to release cap. 13 PSI

Содержание Trail Touring 2006
































































































































































Результаты поиска

Содержание Trail Touring 2006

Отзывы:

Похожие инструкции для Trail Touring 2006

Бренды по названию

Популярные бренды

Polaris Trail Touring 2006, Руководство пользователя

Результаты поиска

Содержание Trail Touring 2006

Отзывы:

Похожие инструкции для Trail Touring 2006

Бренды по названию

Популярные бренды