Polaris Timbersled ST 120 RAW 2019, Руководство пользователя

Страница: 52 / 70

SPINDLE MAINTENANCE
The spindle does not require any maintenance. It is designed to bend if it comes
in contact with a rock or stump during operation. Timbersled recommends
thoroughly inspecting the assembly for bends or cracks before you ride.
FALL TUNE-UP
For maximum performance, your Timbersled dealer can perform a fall service
tune-up. Their experienced and trained service technicians will keep your snow
bike in peak operating condition.
MATTE CLEAR COAT CLEANING (IF EQUIPPED)
Matte finish products are prone to trapping dirt, oils and other contaminants.
Timbersled recommends cleaning with warm water and a mild dish detergent.
Use a soft sponge to gently rub the surface and rinse with clean warm water. For
stubborn stains such as grease or oil, use a citrus based cleaner (3M Citrus
Base Cleaner recommended). Spray onto the area to be cleaned and rub with a
soft sponge. Allow to sit for a couple of minutes and wash away with clean warm
water. Repeat as necessary to clean the surface.
NOTICE
Never use a polishing/buffing wax or any sponge that has an abrasive surface.
These products will buff the matte surface of the finish resulting in a glossy
finish. It is not recommended that you clean matte finishes with a pressure
washer as this will further imbed contaminants into the clear coat and possibly
damage the labels.
50
MAINTENANCE