Polaris Sportsman 9922172 Скачать руководство пользователя

Страница: 86 / 140

MAINTENANCE

Brake Fluid

Check brake fluid levels for both brake systems before each ride.

Always maintain brake fluid at the recommended level. Do not overfill.
The brakes should feel firm when they're applied. Spongy or weak

brakes may indicate a fluid leak or low fluid level. A low fluid level

may also mean that brake pads are worn and need to be replaced. Do not

operate the vehicle with spongy or weak brakes. See your dealer for ser-

vice.

If the fluid level is low add DOT 4 brake fluid only. See page 126 for the

part numbers of Polaris products.

Under normal operation, the diaphragm extends into the reservoir as

fluid level drops. If the fluid level is low and the diaphragm is not

extended, a leak is likely and the diaphragm should be replaced. To

ensure proper diaphragm operation, always fill the reservoir as needed

whenever the cover is loosened or removed. Do not overfill.

WARNING

Operating the Quadricycle with a spongy brake can result in loss of braking,

which could cause an accident. Never operate the Quadricycle with spongy-

feeling brakes.

WARNING

An over-full master cylinder may cause brake drag or brake lock-up, which

could result in serious injury or death. Maintain brake fluid at the

recommended level. Do not overfill.

WARNING

Never store or use a partial bottle of brake fluid. Brake fluid is hygroscopic,

meaning it rapidly absorbs moisture from the air. The moisture causes the

boiling temperature of the brake fluid to drop, which can lead to early brake

fade and the possibility of accident or severe injury. After opening a bottle of

brake fluid, always discard any unused portion.

Содержание Sportsman 9922172













































































































































Результаты поиска

Содержание Sportsman 9922172

Отзывы:

Похожие инструкции для Sportsman 9922172

Бренды по названию

Популярные бренды

Polaris Sportsman 9922172, Руководство пользователя

Результаты поиска

Содержание Sportsman 9922172

Отзывы:

Похожие инструкции для Sportsman 9922172

Бренды по названию

Популярные бренды