background image

131

WARRANTY

LIMITED WARRANTY

Polaris Industries Inc., 2100 Highway 55, Medina, MN 55340, gives a TWO YEAR 

LIMITED WARRANTY on all components of the Polaris Quadricycle against defects in 

material or workmanship. This warranty covers the parts and labor charges for repair or 

replacement of defective parts which are covered by this warranty. This warranty begins 

on the date of purchase. This warranty is transferable to another consumer during the 

warranty period through a Polaris dealer.

REGISTRATION

At the time of sale, the Warranty Registration Form must be completed by your dealer 

At the time of sale, the Warranty Registration Form must be completed by your dealer 

and submitted to Polaris within ten days. Upon receipt of this registration, Polaris will 

record the registration for warranty. THE PURCHASER MUST COMPLETE A 

QUADRICYCLE SAFETY TRAINING COURSE PROVIDED BY THE DEALER IN 

ORDER TO HAVE VALID WARRANTY ON THE QUADRICYCLE. No verification 

of registration will be sent to the purchaser as the copy of the Warranty Registration 

Form will be the warranty entitlement. If you have not signed the original registration 

and received the "customer copy", please contact your dealer immediately. NO WAR-

RANTY COVERAGE WILL BE ALLOWED UNLESS YOUR QUADRICYCLE IS 

REGISTERED WITH POLARIS.
Initial dealer preparation and set-up of your vehicle is very important in ensuring trou-

ble-free operation. Purchasing a machine in the crate or without proper dealer set-up will 

void your warranty coverage.

Содержание Sportsman 9922172













































































































































Отзывы: