Polaris Sportsman 9922172 страница 41 Скачать руководство пользователя

Страница: 41 / 140

FEATURES AND CONTROLS

Instrument Cluster

Rider Information Center

Downloading Codes

3. The Check Engine icon will blink once, pause, then blink twice

(blink code 12) to begin the diagnostic sequence. The EFI module is

now searching for blink codes. If a code exists, the Check Engine

icon will flash the code.

4. Count the number of times the Check Engine icon flashes.

Example

: For the two blink codes 42 and 36, the Check Engine icon will

flash 4 times, pause, then flash 2 times (code 42), then pause longer,

blink 3 times, pause, and blink 6 times (code 36).
5. A code 61 will signal the end of the sequence. If no blink codes are

found, only codes 12 and 61 will appear during the sequence.

NOTE:

The word “WAIt” will remain on the screen through this entire process.

Code Definitions

Open Load:

There is a break in the wires that lead to the item listed in

the chart (injector, fuel pump, etc.), or the item has failed.

Short-to-Ground:

The wire is shorted to ground between the electronic

control unit and the item listed in the chart.

Shorted Load:

The wires leading to the item listed in the chart are

shorted together, or the item has shorted internally.

Short-to-Battery:

The wire leading from the item listed in the chart to

the electronic control unit is shorted to a wire at battery voltage.

Содержание Sportsman 9922172













































































































































Результаты поиска

Содержание Sportsman 9922172

Отзывы:

Похожие инструкции для Sportsman 9922172

Бренды по названию

Популярные бренды

Polaris Sportsman 9922172, Руководство пользователя

Результаты поиска

Содержание Sportsman 9922172

Отзывы:

Похожие инструкции для Sportsman 9922172

Бренды по названию

Популярные бренды