Polaris PVCR 0833 WI-FI IQ HOME, Руководство по эксплуатации, Страница: 32 / 140

32
then restart the program and repeat the
connection process;
f. Activate the device diagnostic mode - see
the section “Connection Settings” in the User
Guide;
g. Reset the device - see the section
“Connection Settings” in the User Guide;
2. The connection
was successful, the
device appeared in
the list of devices in
the application, but its
control is not
available.
Make sure your phone reconnects to the WiFi
network. To do this, open the WiFi settings
section of the phone and, if necessary,
manually connect to your WiFi network.
3. The device was
successfully
connected, but
unexpectedly stopped
responding to
commands from the
application.
Go to the device page and click on the
asterisk in the upper right corner. Next, in
the Connection Diagnostics section, read the
diagnostic diagram. Click on the exclamation
mark next to the red section of the network
and follow the instructions of the online
assistant.
Have not found a solution for your problem?
See additional information or contact support
service in the section "Smart Home" on our
website.
STORAGE
Electrical devices are stored in a closed, dry and clean room at an ambient temperature of no higher than 40 °C
with relative humidity not higher than 70% and no dust, acid or other vapours in the environment that negatively
affect the materials of the electrical device.
Keep the device out of the reach of children.
TRANSPORTATION
Electrical devices are transported by all means of transport in accordance with the rules for that particular type
of carriage of goods in place on a particular type of transport. When transporting the device, use the original
factory packaging.