Polaris PVCR 0833 WI-FI IQ HOME, Руководство по эксплуатации, Страница: 26 / 140

26
For phones with operating system IOS:
New appliance configuration

The "Home" screen: click on "Add Appliance".

Select the vacuum cleaner (PVCR-0833) in the "All Appliances" list

Click on "Continue"

The application prompts you to establish connection with WiFi-network “PVCR-0833”, click on
"Connect"

Then follow prompts in the next screen to pair the appliance:
1. Press and hold the "Auto" button until two beeps.
2. Then click on "Continue" in the application

This causes displaying available WiFi networks. Select a sought network and type in password of
WiFI network you want to set the appliance for, then click on "Next"

Wait until the configuration procedure completion.

Click on "Continue"
Pairing a previously configured appliance:

The "Home" screen: click on "Add Appliance".

Look through the "Next to You" list to select the vacuum cleaner (PVCR-0833) (If the appliance in
absent, make sure your mobile device is connected to the WiFi network the applicance is configured
for).

Then follow prompts in the next screen to pair the appliance:
1. Press and hold the "Auto" button until two beeps.
2. Then click on "Continue" in the application
The appliance reconfiguration for another Wi-Fi network (diagnostics mode):

Press and hold the "Auto" button until two beeps and wait 10 seconds after that.

Click on "New Appliance" on the "Home" screen.

Select the vacuum cleaner (PVCR-0833) in the "All Appliances" list.

Click on "Continue"

The application prompts you to establish connection with WiFi-network “PVCR-08330”, click on
"Connect"

Then follow prompts in the next screen to pair the appliance:
1. Press and hold the "Auto" button until two beeps and wait 10 seconds after that.
2. Then click on "Continue" in the application

This causes displaying available WiFi networks. Select a sought network and type in password of
WiFI network you want to set the appliance for, then click on "Next"

Wait until the configuration procedure completion.

Click on "Continue"
VACUUM CLEANER RESET TO ORIGINAL WIFI SETTINGS:
1. Press and hold the auto button for up to two beeps, then release the button and immediately press and
hold it for up to two beeps again. And wait until the appliance reboots (about 10 seconds).
VACUUM CLEANER FEATURES COVERED IN APPENDIX
(detailed description of features and peculiarities of the appliance operation is given in the following
chapter).
1. Start/ stop
2. Remote control of motion direction (joystick)