Polaris ATP 330 4x4 Скачать руководство пользователя

Страница: 42 / 141

FEATURES AND CONTROLS

Throttle Lever

Engine speed and vehicle

movement are controlled by

pressing the throttle lever.

The throttle lever (1) is spring

loaded. Engine speed returns

to idle when the lever is

released.
This ATV is equipped with

Polaris Electronic Throttle Control

(ETC), which is designed to reduce the risk of a

frozen or stuck throttle. If the throttle cable should stick in an open

position when the operator releases the throttle lever, the engine will

stop, and power to the rear wheels will cease.

The Electronic Throttle Control (ETC) stops the engine in the

event of a throttle system malfunction and is provided for your

safety. Do not attempt to modify the ETC system or replace it

with any after market throttle mechanisms.

WARNING

Do not start or operate an ATV with sticking or improperly

operating throttle controls, which could cause an accident and

lead to severe injury or death.
Always contact your dealer for service repairs if throttle problems

arise.
Failure to check or maintain proper operation of the throttle

system can result in an accident if the throttle lever sticks during

operation.
Always check the lever for free movement and return before

starting the engine. Also check occasionally during operation.

WARNING

Содержание ATP 330 4x4














































































































































Результаты поиска

Содержание ATP 330 4x4

Отзывы:

Похожие инструкции для ATP 330 4x4

Бренды по названию

Популярные бренды

Polaris ATP 330 4x4, Руководство пользователя

Результаты поиска

Содержание ATP 330 4x4

Отзывы:

Похожие инструкции для ATP 330 4x4

Бренды по названию

Популярные бренды