Polaris ATP 330 4x4 Скачать руководство пользователя

Страница: 85 / 141

MAINTENANCE AND LUBRICATION

Lubrication Recommendations

Premium 4 Synthetic Oil

Polaris Premium 4 All Season Synthetic engine oil has been specially

formulated for use in Polaris 4-cycle engines. It’s a fully synthetic,

high performance, multi-viscosity oil designed to provide the ultimate

in lubrication performance and protection.

NOTE:

See page 121 for the

part numbers of Polaris products.
Premium 4 possesses unsurpassed film strength over the widest

possible temperature range. It resists viscosity and frictional

breakdown in ambient temperatures from -40

F. to 120

F. Its

exceptional frictional properties result in more efficient operation, more

power output and lower fuel consumption.
Although Polaris Premium 4 is the only oil recommended for use in

this engine, use of any API certified “SH” oil is allowable as long as

it’s 0W-40. Oil may need to be changed more frequently if Polaris

Premium 4 is not used. Follow the manufacturer’s recommendations

for ambient temperature operation.

Engine Oil Check

The oil tank is located on the left side

of the vehicle.
1. Position the machine on a level

surface.

2. Start the engine and let it idle for

20-30 seconds. Stop the engine.

3. Remove the dipstick (1) and wipe

it dry with a clean cloth.

4. Screw the dipstick completely in.

NOTE:

The dipstick must be

screwed completely in to keep the angle and depth of the stick

consistent.

5. Remove the dipstick and

read the oil level.

Maintain the oil level in

the normal operating

range (2). Do not overfill.

CAUTION

Mixing brands or using a non-recommended oil may cause serious

engine damage. We recommend the use of Polaris Premium 4 All

Season synthetic oil or API certified “SH” oil, 0W-40. Never

substitute or mix oil brands. Use only 0W-40.

ADD 8 OZ.

NORMAL

FULL

Содержание ATP 330 4x4














































































































































Результаты поиска

Содержание ATP 330 4x4

Отзывы:

Похожие инструкции для ATP 330 4x4

Бренды по названию

Популярные бренды

Polaris ATP 330 4x4, Руководство пользователя

Результаты поиска

Содержание ATP 330 4x4

Отзывы:

Похожие инструкции для ATP 330 4x4

Бренды по названию

Популярные бренды