Polaris 600 IQ 2008 Скачать руководство пользователя страница 29

Страница: 29 / 154

SAFETY

Safety Decals and Locations

Operation Warning

• To avoid serious injury or death, read and understand all warnings

and the Owner's Manual before operation. If manual is missing, con-

tact a Polaris dealer for a replacement.

• This vehicle is capable of high speeds. Buried objects or uneven

terrain can cause loss of control. Reduce speed and use extreme

caution when operating in unfamiliar terrain.

• Excessive speed, especially at night or with limited visibility, can

result in insufficient time for you to react to terrain changes, to

avoid unexpected obstacles, or to stop safely.

• Never consume alcohol or drugs before or while operating this vehi-

cle.

• In an emergency, push down the Auxiliary Shut-Off Switch, located

on the top of the throttle control assembly, to stop the engine. Then

pull the brake lever to stop.

• Always wear an approved helmet, eye protection, and adequate

clothing while operating this vehicle.

• This vehicle is designed for adult use only. Check local laws for age

requirements.

• When operating with a passenger (on approved models only)

reduce speed and allow extra space for steering and stopping. A

passenger reduces your ability to control the vehicle.

• When operating on hard-packed snow, ice, or when crossing roads,

steering and braking ability are greatly reduced. Reduce speed and

allow extra space to turn or stop.

• To maintain vehicle control on ice or hard-packed surfaces, you

should have a proper balance of ski carbides to track studs. See

Owner's Manual for proper use of traction products.

• Repeated stops from high speed may cause fading or sudden loss

of braking ability.

• Parking brake may relax when used for long periods. Do not leave

brake engaged for more than five minutes.

• Before starting engine, check throttle, brake, and steering for

proper operation. Make sure hood is latched. Be seated and in posi-

tion to control the vehicle.

Oil injection system: Use unmixed fuel only. Check oil level when

refueling.

Содержание 600 IQ 2008



























































































































































Результаты поиска

Содержание 600 IQ 2008

Отзывы:

Похожие инструкции для 600 IQ 2008

Бренды по названию

Популярные бренды

Polaris 600 IQ 2008, Руководство пользователя

Результаты поиска

Содержание 600 IQ 2008

Отзывы:

Похожие инструкции для 600 IQ 2008

Бренды по названию

Популярные бренды