Polaris 600 IQ 2008 Скачать руководство пользователя страница 22

Страница: 22 / 154

SAFETY

Operator Safety

Drive Belt

Do not operate the engine with the drive belt removed.

Any servicing that requires operation without a belt must be performed

by your dealer. Operation of the engine with the belt removed may result

in injury or damage to the engine.

Intake Silencer

Do not operate the engine with the intake silencer or filter removed.

Damage to the engine may occur if the intake silencer or filter are

removed.

Clutches

Do not attempt to service the clutches.

All clutch service must be performed by your dealer. The clutch is a

complex mechanism that rotates at high speeds. Each clutch is dynami-

cally balanced before installation. Any tampering may disrupt this preci-

sion balancing and create an unstable condition.

Cold Weather Drive-Away

Whenever your snowmobile has been parked for a length of time, espe-

cially overnight, always make sure the skis and track are loosened from

ice and snow before attempting to drive. Apply the throttle with enough

authority to put the machine into motion, but always operate within

safety limits.

Maneuverability

While much control and maneuverability is achieved through the steer-

ing system and skis, maximum control is achieved by the shifting of

your body weight. Maneuverability will change for lighter operators or

machines designed to carry a load.

Содержание 600 IQ 2008



























































































































































Результаты поиска

Содержание 600 IQ 2008

Отзывы:

Похожие инструкции для 600 IQ 2008

Бренды по названию

Популярные бренды

Polaris 600 IQ 2008, Руководство пользователя

Результаты поиска

Содержание 600 IQ 2008

Отзывы:

Похожие инструкции для 600 IQ 2008

Бренды по названию

Популярные бренды