Polaris 600 IQ 2008 Скачать руководство пользователя страница 26

Страница: 26 / 154

SAFETY

Safety Decals and Locations

Warning decals have been placed on the snowmobile for your protec-

tion. Read and follow the instructions of the decals and other warnings

on the snowmobile carefully. If any of the decals depicted in this manual

differ from the decals on your snowmobile, always read and follow the

instructions of the decals on the snowmobile.

If any decal becomes illegible or comes off, contact your Polaris dealer

to purchase a replacement. Replacement safety decals are provided by

Polaris at no charge. The part number is printed on the decal.

Clutch Cover Warning

This warning decal is found under the hood on the clutch cover:

WARNING
Do not operate engine with hood open.
Do not attempt adjustment with engine running.
Do not operate engine with plenum/belt guard removed.
Never run engine with drive belt removed.
Never service clutches yourself -- see your dealer.

Pressure Cap Warning

This warning decal is found under the hood on the pressure cap of appli-

cable liquid cooled models:

Do not open hot. Test or replace when changing coolant. Press

down and turn to release cap. 13 PSI

Содержание 600 IQ 2008



























































































































































Результаты поиска

Содержание 600 IQ 2008

Отзывы:

Похожие инструкции для 600 IQ 2008

Бренды по названию

Популярные бренды

Polaris 600 IQ 2008, Руководство пользователя

Результаты поиска

Содержание 600 IQ 2008

Отзывы:

Похожие инструкции для 600 IQ 2008

Бренды по названию

Популярные бренды