Polaris 600 Fusion Скачать руководство пользователя страница 16

Страница: 16 / 145

SAFETY

Operator Safety

Avalanches

Snowmobilers should always be properly

trained and equipped before traveling in

mountainous terrain:
• Take an avalanche class
• Travel with experienced people
• Travel on designated trails
• Make sure each person is equipped

with a shovel, probe and avalanche

beacon.

You don't have to be snowmobiling on a slope for an avalanche to occur.

Be aware that all of the snow is connected. You may be riding on a flat

slope or snow covered road, but if the snowpack above is unstable

enough you can trigger an avalanche on a steeper slope above you.

Always be aware of snow conditions above you as you travel in moun-

tainous terrain.

Before riding in mountainous terrain, call or log on to your local ava-

lanche advisory to get current weather and snow stability information.

For more information about avalanche training and avalanche condi-

tions, contact local law enforcement in your area, or visit either the

American Avalanche Association online at www.americanavalancheas-

sociation.org or the U.S. Forest Service National Avalanche Center at

www.avalanche.org.

Содержание 600 Fusion


















































































































































Результаты поиска

Содержание 600 Fusion

Отзывы:

Похожие инструкции для 600 Fusion

Бренды по названию

Популярные бренды

Polaris 600 Fusion, Руководство пользователя

Результаты поиска

Содержание 600 Fusion

Отзывы:

Похожие инструкции для 600 Fusion

Бренды по названию

Популярные бренды