Polaris 600 Fusion Скачать руководство пользователя страница 113

Страница: 113 / 145

110

MAINTENANCE

General Maintenance

Drive Belt Installation

1. Drop the drive belt over the

drive clutch and pull back the

slack.

NOTE:

To ensure satisfactory

belt life, install belts so

they operate in the same

direction of rotation by

positioning the identifica-

tion numbers so that you

can read them. If

required, separate the

sheaves as outlined in

the belt removal proce-

dures.

2. Rotate the L-wrench counter-clockwise to tighten the sheaves while

working the belt to the outer edge of the sheaves.

3. Remove the wrench and store it in the tool kit.
4. Reinstall the side panel.
5. Close and secure the hood.

Drive Belt

Belt width and length must match the center distance of the clutches and

sheave width of the drive clutch. Polaris recommends the use of O.E.M.

belts. Other belts may match the dimensions, but can drastically change

the shift pattern, resulting in poor performance.

NOTE:

A worn belt will continue to function, but will not deliver maxi-

mum performance. Always carry a spare belt in case of an

emergency.

Содержание 600 Fusion


















































































































































Результаты поиска

Содержание 600 Fusion

Отзывы:

Похожие инструкции для 600 Fusion

Бренды по названию

Популярные бренды

Polaris 600 Fusion, Руководство пользователя

Результаты поиска

Содержание 600 Fusion

Отзывы:

Похожие инструкции для 600 Fusion

Бренды по названию

Популярные бренды