Polaris 600 Fusion Скачать руководство пользователя страница 24

Страница: 24 / 145

SAFETY

Safety Decals and Locations

Warning decals have been placed on the snowmobile for your protec-

tion. Read and follow the instructions of the decals and other warnings

on the snowmobile carefully. If any of the decals depicted in this man-

ual differ from the decals on your snowmobile, always read and follow

the instructions of the decals on the snowmobile.

If any decal becomes illegible or comes off, contact your Polaris dealer

to purchase a replacement. Replacement safety decals are provided by

Polaris at no charge. The part number is printed on the decal.

Clutch Cover Warning

This warning decal is found under

the hood on the clutch cover:

WARNING
Do not operate engine with

hood open.
Do not attempt adjustment

with engine running.
Do not operate engine with plenum/belt guard removed.
Never run engine with drive belt removed.
Never service clutches yourself -- see your dealer.

Pressure Cap Warning

This warning decal is found under the hood on the pressure cap of appli-

cable liquid cooled models:

Do not open hot. Test or replace when changing coolant. Press

down and turn to release cap. 13 PSI

Содержание 600 Fusion


















































































































































Результаты поиска

Содержание 600 Fusion

Отзывы:

Похожие инструкции для 600 Fusion

Бренды по названию

Популярные бренды

Polaris 600 Fusion, Руководство пользователя

Результаты поиска

Содержание 600 Fusion

Отзывы:

Похожие инструкции для 600 Fusion

Бренды по названию

Популярные бренды