Polaris 440 IQ Скачать руководство пользователя страница 29

Страница: 29 / 118

FEATURES AND CONTROLS

Polaris DRAGON Ignition System

Your snowmobile is equipped with an ignition system feature that

improves competition performance by increasing exhaust system

temperature. The DRAGON Ignition System provides maximum

“holeshot” performance for racing applications.

WARNING

DRAGON mode increases the exhaust system temperature and

causes engine misfire and backfire. Flammable materials and

vapors may ignite and result in fire and explosion, which may

cause serious injury, death or property damage. Read the

Owner’s Manual. Always follow all instructions and warnings.

DRAGON Mode Facts

The DRAGON Ignition System is intended for competition use on

closed courses by experienced riders only.

There is no benefit to using DRAGON mode for normal trail riding.

Unnecessary, extended or excessive use of DRAGON mode can re-

sult in severe engine damage, which is excluded from Polaris war-

ranty coverage.

DRAGON mode usually heats up the exhaust system within 5 to 20

seconds, depending upon the initial temperature of the exhaust sys-

tem.

Two different sounds may be heard when using DRAGON mode.

One sound is an erratic misfire that may be heard when the exhaust

system is heating up. The other sound is a consistent misfire (with a

slight rise in engine RPM) when the exhaust system is at target oper-

ating temperature.

DRAGON mode maintains the engine speed between 4500 and 5100

RPM.

Be sure that the clutch engages at 5300 RPM or above to prevent

forward creep of the vehicle. See your dealer if the clutch needs ad-

justment.

Please refer to the Polaris jetting chart and use the recommended jet

for current temperatures as this system is sensitive to jet changes.

Содержание 440 IQ























































































































Результаты поиска

Содержание 440 IQ

Отзывы:

Похожие инструкции для 440 IQ

Бренды по названию

Популярные бренды

Polaris 440 IQ, Руководство пользователя

Результаты поиска

Содержание 440 IQ

Отзывы:

Похожие инструкции для 440 IQ

Бренды по названию

Популярные бренды